What if my flip wont turn on




















Show 16 more comments. Isaac zack isaac I had the same problem! So yesterday I divided to take it apart and I actully got it to work agian! What you want to redo is take off all of the outside casing and expose the raw wiring of the on button. Unlatch the wire and put it back in and the lights should flash.

I will say that it will likely not be water proof so take it with a grain of salt. Let me know if that works. Many thanks. For those who will do this: once you see the flat blue wire, flip up the black tab. Just reclose the black tab. DO NOT pull the tab or the white connector. And for those who need to disassemble, there is a video in YouTube. Look for "how to repair a JBL Flip4 speaker". So you can start to take it apart by using a small flat head screw driver at the top of the fabric portion near the power button on both sides.

There are three retaining clips to release on each side. This will remove the plastic cover from the top power button. I was using the charger but had no lights at all and it wouldn't turn on. Show 12 more comments. Jesus Cardenas. Chances are the small blue plug inside came unplugged from the impact check on youtube for disassemble video then remove rubber where lights are located there you will see the blue cable to plug back in alittle difficult but doable hope this helps.

Cardenas is right! Mine started to not shutdown and fail some lights after I use it as a car stereo, my guess is that from the constant knocking and shaking inside the car, some parts of the flat blue wire got loose. I solved the problem by taking it apart and reconecting the wire!

I drop mine all the time. Its pretty durable and that's never happened. That's what they get for making it in China trying to save a buck on labor. You get slant eyes who probably programmed a bug into the coding. It was a bit hard to pull the flat cable properly, so it took some time to me to fix it. But, regardless of the 1 hour effort to make it turn on again, it was good to fix the JBL flip 4 by myself. It's just a cord inside the board that has the power button etc. On that board it's a thin cord that might get easily disconnected that's the only thing it needs.

This is so dumb, but it actually worked. Mine stopped working after falling from the kitchen counter. No lights or reaction when I try to turn it on or connect it to a charger. Show 5 more comments.

Trisha Knops peace4all. I'm so proud of myself!! I figured it out! You need to go back to the original charging connector. Do not use your regular phone connector it does not charge. I had this happen with two of my speakers. Recharged perfectly with correct speaker charge cable!! Ya you don't want to use anything over 5v and 3amps or mA for the flip 5. Only problem is that it only comes with a cord but no charger I had trouble pairing the Flip 4 with any device, it would not be recognized.

I thought it was game over!! I tried everything! Nothing worked. After watching every video on YouTube…. I simply used the following method to get it to power up. Use the factory charger! BUT In order to get the speaker to power up…. Power it back up and you will be good to go on powering up and pairing.

Keep trying until you succeed. It works. Rebecca Foster. I had the same problem but I noticed that by turning it on its side the charger dots started blinking. It has fallen to the ground several times so maybe something is loose inside. This was a random trial and error case where I just tried holding down the buttons in various combos until something reacted.

Hopefully this combo helps someone else! EDIT: Shortly after this happened, when I tried to play audio through my speaker, something weird happened. There are different reasons why your JBL Flip 5 is not turning on. For example, drained out the battery, bugs in the software, defective power button, or any other hardware issue. First of all, you should try to reset your JBL Flip 5. Factory reset or hard reset is very helpful in troubleshooting.

This process removes all the data stored on the device and restores default settings. This method is also helpful in solving other issues on JBL Flip 5.

You require just 2 minutes to reset your JBL Flip 5. Possibly, the battery of your speaker has drained out. It may be the reason why your JBL Flip 5 is not turning on. To charge the speaker;. It can be submerged underwater at least for 30 minutes. However, if it remains in contact with water for a long time, the JBL Flip 5 may be damaged.

Water enters the circuit board and halts normal functioning. If you suspect that the circuit board of your speaker is damaged, consult a professional. Avoid opening the speaker so that you can prevent further issues. A faulty battery is a common reason for JBL Flip 5 not turning on. Sometimes, your device turns on and off repeatedly. It turns on for a moment and powers off the next.

This is an indication that the battery of your JBL speaker is defective. Fully charge the speaker and turn it on. If this solution does not work then seek a technical assistant to replace the battery.

You can replace the battery of your JBL Flip 5 at home by following the guidelines given in our article.



0コメント

  • 1000 / 1000